Convert from point [Didot] to ell [Scotland]

Unit Definition (point [Didot])
The point is a unit of length used by typographers and printers. When printing was done from hand-set metal type, one point represented the smallest element of type that could be handled, roughly 1/64 inch. Eventually, the point was standardized in Britain and America as exactly 1/72.27 = 0.013 837 inch, which is about 0.35 mm (351.46 micrometers). In continental Europe, typographers traditionally used a slightly larger point of 0.014 83 inch (about 1/72 pouce, 0.377 mm, or roughly 1/67 English inch), called a Didot point after the French typographer Firmin Didot (1764-1836). In the U.S., Adobe software defines the point to be exactly 1/72 inch (0.013 888 9 inch or 0.352 777 8 millimeters), a unit sometimes called the big point (bp). The German standards agency DIN has proposed that all these units be replaced by multiples of 0.25 millimeters (1/101.6 inch).

Unit Definition (ell [Scotland])
See the English El (or Ell). This Scottish length is shorter than the English El. It may reflect an old practice of cloth merchants in giving an extra inch with each yard, to allow for any irregular cutting at the ends of the piece. However, the English cloth ell is definitely longer than the yard; it seems to be the distance from the shoulder to the fingers of the opposite hand. This reflects a practice of cloth merchants of holding the cloth at the shoulder with one hand and pulling the piece through with the opposite hand. This cloth ell was used with a similar length in France, where it was called the aune. The Dutch el and German elle are a little more than half the English ell; they may represent "arm's-length" units like the Italian braccio, the Russian sadzhen, and the Turkish pik