Convert from point [Didot] to chain [Ramsden, engineer]

Unit Definition (point [Didot])
The point is a unit of length used by typographers and printers. When printing was done from hand-set metal type, one point represented the smallest element of type that could be handled, roughly 1/64 inch. Eventually, the point was standardized in Britain and America as exactly 1/72.27 = 0.013 837 inch, which is about 0.35 mm (351.46 micrometers). In continental Europe, typographers traditionally used a slightly larger point of 0.014 83 inch (about 1/72 pouce, 0.377 mm, or roughly 1/67 English inch), called a Didot point after the French typographer Firmin Didot (1764-1836). In the U.S., Adobe software defines the point to be exactly 1/72 inch (0.013 888 9 inch or 0.352 777 8 millimeters), a unit sometimes called the big point (bp). The German standards agency DIN has proposed that all these units be replaced by multiples of 0.25 millimeters (1/101.6 inch).

Unit Definition (chain [Ramsden, engineer])
The Ramsden chain is quite different to the Gunter chain. The Ramsden chain was commonly used by American surveyors. It equals approximately 100 feet and is also known as the engineer's chain.